Typical
installation VETUS advises to install the water strainer always above the waterline. Only type CWS and FTR330. M series can be installed below the waterline. Always install a sea-cock behind the inlet water scoop. |
|
FTR140 |
Type
FTR140 This water strainer is available with three different hose connection diameters. See page 60 for water strainer install kit. Specifications • Housing is made of Polypropylene GF • Filter element is made of HD Polyethylene • Cover is made of Styrol/Acrylonitrile SAN
|
||||||||||||||||
|
FILTER150 |
Type FILTER150 This water strainer is suitable for Ø 1 1/8’’ (28,5 mm) hoses. Specifications • Housing is made of Polypropylene GF • Filter element is made of Polyamide • Cover is made of A.B.S.
|
||||||||
|
Type FTR330 This water strainer is available for six different hose connections. See page 60 for water strainer install kit. Specifications • Housing is made of polypropylene GF • Filter element is made of HD Polyethylene • Cover is made of Styrol/Acrylonitrile SAN
|
|||||||||||||||||||||||||||||
FTR470 |
Type FTR470 Easy mounting with 360-degree rotating wall bracket This strainer is supplied with a rotating stainless steel (AISI 316) wall bracket for easy alignment of the hose connections and clamping it securely in place. This eliminates the need for back-bolting and simplifies the mounting process. Specifications • Housing is made of Polypropylene GF • Filter element is made of HD Polyethylene • Cover is made of Polypropylene GF/Polycarbonate See page 60 for the water strainer installation kit.
|
||||||||||||||||||||||||||||
Type FTR1320 This type is provided with adjustable stainless steel (AISI 316) brackets for bulkhead mounting and is available with three different threaded connection diameters. Hose pillars are not supplied as standard. They can be found on page 408 of this catalogue. Specifications • Housing is made of Polypropylene GF • Filter element is made of Polyethylene • Cover is made of A.B.S.
|
FTR1900 |
Type FTR1900 This type has two different threaded connection diameters and comes with adjustable stainless steel (AISI 316) mounting brackets for bulkhead installation. Hose pillars are not supplied as standard. They can be found on page 408 of this catalogue. Specifications • Housing is made of Polypropylene • Stainless steel (AISI 316) filter element • Acrylic cover
|
FTR330..M |
Type FTR330..M The filter housing is made of NAVIDURIN® and features 1 3/4", 1", 1 1/4" or 1 1/2” (19, 25, 32 or 38 mm) hose connections. The metal lid allows easy inspection of the filter without removal. The FTR330..M series is tested up to a maximum of 8 bar over pressure, which means these filters are safe to place below the waterline! Specifications • NAVIDURIN® material • Easy inspection without dismantling • New easily removable metal cover • Robust and durable filter • Can be mounted below the waterline
|
CWS |
Heavy duty filter: Type CWS For installations where the cooling water strainer must be mounted close to or below the waterline and for commercial applications, these nickel plated bronze strainers are an ideal solution. The cover is removable with one screw. Tested up to 7 bar overpressure. This filter is available in three different sizes, with threaded connections of G1, G1 1⁄4 and G1 1⁄2. Matching V-Quipment hose connections are available separately, see table below for item numbers. Specifications • Housing is made of nickel plated bronze • Cover is made of polycarbonate • Filter element is made of stainless steel (AISI 316) • Mounting bracket is made of nickel plated bronze • Can be mounted near or below the waterline • V-Quipment hose connections available separately, see also page 404
|
||||||||||||||||||||||||
FTR525 |
Type FTR525 This water strainer has G 11⁄2 threaded connections. A set of stainless steel (AISI 316) mounting brackets can be supplied as an option. Hose pillars are not supplied as standard. They can be found on page 408 of this catalogue. Specifications • Stainless steel (AISI 316) housing and filter element • Acrylic cover
|