Water hose type DWHOSEB This hose is made of transparent PVC with spiral inlay and is suitable for transportation of fresh water on board, both suction and pressure. Temperature resistant between 23 and +149oF (-5 and + 65oC) |
Fuel hose type FUHOSEA For transportation of petrol and diesel fuels. This hose is made from CR rubber with a NBR rubber liner. It can be used for fuel transport or fuel tank ventilation. Particularly suitable for use with petrol because of the low permeability. Type FUHOSEA meets the CE standard: ISO 7840 marine fuel A1. Type FHA115 Especially suitable for use with petrol because of its low permeability of 15 grams/m2/ 24 hour. The lining is translucent nylon for fuel and permeation resistance to 100oC. These fuel hoses have been successfully subjected to a fire test for 2,5 minutes. Suitable for diesel fuel, bio diesel (up to B100), petrol fuel, oil and ethanol. Meets the highest CE standard: ISO 7840 marine fuel A1-15 and ISO 10088, CE, ABYC, CARB, EPA, SAE J 1527 A1-15, NMMA Type Accepted (2618936 and 2618937), USCG A1. |
Type WWHOSE..B Waste Water Hose For transportation of grey waste water. This type of hose is made of white PVC with a steel spiral inlay. It is recommended for the transportation of grey waste water (not toilet waste). Impermeable sanitary no-smell hoses type SAHOSE An absolute must for toilets. These hoses are made of SBR rubber with inlays of woven synthetic fabric and steel spiral. Recommended especially for transportation of biological waste from (marine) toilets (black water). |
Type BLHOSE Ventilation hose For shell and extraction ventilators. Type BLHOSE is made of a woven fiberglass fabric, impregnated with PVC. Temperature resistant between -40° and + 212° F (-20o and +100oC). Hose type VHOSE Very flexible suction/pressure hose. This hose can connect the MOFI air vent to the extraction ventilator type 178. Available for Ø 6 or 7” (152 or 178 mm) hose connectors. |
Hose for fluids in closed heating / cooling
systems type CCHOSE Excellent for fluids in air conditioning and central heating. Type CCHOSE is made of EPDM rubber with inlay of woven reinforcement fabric. Suitable for fluids in closed heating and/or cooling systems. When used with air conditioning units, an insulating sleeve (made of a combination of polythene and rubber with a closed cell structure) is required. Temperature resistant between 37° and 176°F (+3o and 80oC). |
Cooling water hose type MWHOSE For all cooling fluids. Type MWHOSE is made of EPDM rubber with synthetic fabric and spiraled steel reinforcement. Suitable for cooling water, both suction and pressure (max. 2.5 bar), salt and fresh water. Temperature resistant between -22° and 248°F (30° and +120°C). |
Hose type HWHOSE Ideal for use with calorifier and hot water systems. Type HWHOSE is made of EPDM rubber with an inlay of woven synthetic fabric. Suitable for fresh water and is temperature resistant between -22° and 320°F (30° and +160°C). |
Silicone hose type SIHOSE Extremely high temperature resistant. Type SIHOSE is made of high grade silicone rubber with woven synthetic and an encapsulated steel spiral with an external smooth gloss finish. This flexible hose is highly resistant to ageing and suitable for a wide range of applications (exhaust, cooling and waste water hose). Temperature range of -65°, + 350°F (-54 to 177°C) (intermittently up to 482°F (250°C)). Type SIHOSE meets all the requirements of the ISO13363 type Class B and SAE J 2006 R1 standards. |
Fuel filling hose type FFHOSE Extremely flexible! This type of hose, made of NBR rubber with spiralled steel inlay, is suitable for petrol and diesel fuels. Type FFHOSE meets requirements of SAE J 1527 and the standard ISO 7840 marine fuel A2 and is resistant to temperatures of - 22° and + 212°F (-30° and +100°C). |
Rubber exhaust hose type SLANG Flexible and strong, saving valuable installation time VETUS exhaust hose type SLANG is the most flexible hose because of the increased spiral reinforcement and the extremely supple rubber. The completely smooth internal surface of the hose will reduce back pressure in the engine. Exhaust hoses with an internal diameter up to Ø 6’’ (152 mm) have a bending radius of 1,5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152 mm have a bending radius of twice the diameter. Temperature resistant between - 22° and + 212°F (-30° + 100°C) with brief temperatures of 39°F (115°C ). Type SLANG is approved by Lloyds Register and meets the requirements of the SAE J2006 R2 standard. An engine with a water injection exhaust elbow with an external diameter of 57 mm (2 1/4”) may be connected to 23/8” (60 mm) VETUS exhaust hose. In this case VETUS waterlocks, mufflers, goosenecks and transom connections with a size of 2 3/8” (60 mm) can be used as well. |
DWHOSE..B | Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
DWHOSE10B |
3/8" / 10mm |
5/8" / 16mm | .16 |
7 |
20 |
- |
HCS12 |
30m |
DWHOSE12B | 1/2" / 12mm |
11/16" / 18mm | .18 |
7 |
25 |
- |
HCS12 | 30m |
DWHOSE16B | 5/8" / 16mm |
7/8" / 22mm | .24 |
6 |
35 |
- |
HCS16 HCS20 | 30m |
DWHOSE19B | 3/4" / 19mm |
1" / 26mm |
.32 |
5 |
50 |
- |
HCS16 HCS20 HCS25 |
30m |
DWHOSE25B | 1" / 25mm |
1 5/16" / 33mm | .53 |
5 |
60 |
- |
HCS25 HCS32 | 30m |
DWHOSE28B | 1 1/8" /
28mm |
1 7/16" / 36mm | .57 |
4.5 |
66 |
HCHD(S)034 |
HCS25 HCS32 | 30m |
DWHOSE30B | 1
3/16" / 30mm |
1 1/2" / 38mm | .6 |
4.5 |
70 |
HCHD(S)037 | HCS25 HCS32 | 30m |
DWHOSE32B | 1 1/4" / 32mm | 1 9/16" / 40mm | .56 |
4.5 |
75 |
HCHD(S)034 HCHD(S)040 |
HCS32 HCS40 | 30m |
DWHOSE35B | 1 3/8" / 35mm | 1 5/8" / 44mm | .73 |
4 |
80 |
HCHD(S)043 | HCS32 HCS40 | 30m |
DWHOSE38B | 1 1/2" / 38mm | 1 7/8" / 47mm | .8 |
4 |
90 |
HCHD(S)043 HCHD(S)047 |
HCS32 HCS40 | 30m |
DWHOSE40B | 1 9/16" / 40mm | 1 15/16" / 49mm | .87 |
3 |
95 |
HCHD(S)047 | HCS32 HCS40 | 10m |
DWHOSE45B | 1 3/4" / 45mm | 2 3/16" / 55mm | 1.1 |
3 |
105 |
HCHD(S)051 HCHD(S)055 |
HCS40 HCS50 | 10m |
DWHOSE50B | 1 15/16" / 50mm | 2 3/8" / 60mm | 1.2 |
3 |
125 |
HCHD(S)059 | HCS50- |
10m |
FUHOSEA FHA115..A | Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
FUHOSE05A |
5mm |
11mm | .13 |
10 |
22mm |
- |
HCS08 HCS12 |
30m |
FUHOSE06A | 1/2" / 12mm |
1/2" / 13mm | .16 |
10 |
1" / 25mm |
- |
HCS08 HCS12 | 30m |
FUHOSE08A | 5/8" / 16mm |
5/8" / 16mm | .24 |
10 |
1 3/16" / 30mm | - |
HCS12 | 30m |
FUHOSE10A | 3/4" / 19mm |
11/16" / 18mm | .28 |
10 |
1 3/8" / 35mm | - |
HCS12 HCS16 |
30m |
FUHOSE13A | 1" / 25mm |
7/8" / 22mm | .39 |
10 |
1 15/16" / 50mm | - |
HCS16 HCS20 | 30m |
FUHOSE16A | 1 1/8" /
28mm |
1" / 25mm | .45 |
10 |
2 3/8" / 60mm | - |
HCS16 HCS20 | 30m |
FUHOSE19A | 3/4" / 19mm | 1 1/8" / 28mm | .52 |
10 |
3 1/8" / 80mm | - | HCS20 HCS25 | 30m |
FUHOSE25A | 1 1/4" / 32mm | 1 3/8" / 35mm | .73 |
10 |
4 5/15" / 110mm | HCHD(S)034 |
HCS25 HCS32 | 30m |
FHA11506A | 1 3/8" / 35mm | 5/8" / 15.6mm | .22 |
17.2 |
1/2" / 13mm | - | HCS8 | 76m |
FHA11508A | 1 1/2" / 38mm | 2 1/32" / 16.7mm | .24 |
17.2 | 7/8" / 22mm | - |
HCS12 | 76m |
FHA11510A | 1 9/16" / 40mm | 2 3/32" / 18.4mm | .3 |
17.2 | 7/8" / 22mm | - | HCS12 | 76m |
FHA11513A | 1 3/4" / 45mm | 7/8" / 22.6mm | .38 |
17.2 | 1 3/8" / 35mm | - |
HCS16 | 76m |
|
|
|
|
WWHOSE..B |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
WWHOSE16B |
5/8" / 16mm |
7/8" / 22mm | .23 |
6 |
1 3/8" / 35mm | - |
HCS16 HCS20 | 30m |
WWHOSE19B | 3/4" / 19mm | 1" / 26mm | .32 |
5 |
1 15/16" / 50mm | - |
HCS16 HCS20 | 30m |
WWHOSE25B | 1" / 25mm | 1 5/16" / 33mm | .53 |
5 |
2 3/8" / 60mm | - |
HCS25 HCS32 | 30m |
WWHOSE38B | 1 1/2" / 38mm | 1 7/8" / 47mm | .8 |
4 |
3 9/16" / 90mm | HCHD(S)043 HCHD(S)047 | HCS32 HCS40 | 30m |
WWHOSE45B | 1 3/4" / 45mm | 2 3/16" / 55mm | 1.1 |
3 |
4 1/8" / 105mm | HCHD(S)051 HCHD(S)055 | HCS40 HCS50 | 10m |
SAHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
SAHOSE16 |
5/8" / 16mm |
1" / 26mm | .45 |
3 |
1 15/16" / 50mm | - |
HCS16 HCS20
HCS25 |
20m |
SAHOSE19 | 3/4" / 19mm | 1 1/8" / 29mm | .55 |
3 |
2 9/16" / 65mm | - |
HCS20 HCS25 | 20m |
SAHOSE25 | 1" / 25mm | 1 7/16" / 36mm | .72 |
3 |
2 15/16" / 75mm | HCHD(S)034 | HCS25 HCS32 | 20m |
SAHOSE38 | 1 1/2" / 38mm | 1 7/8" / 48mm | 1.15 |
3 |
3 15/16" / 100mm | HCHD(S)047 | HCS32 HCS40 | 20m |
BLHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Bend Radius |
Roll Length |
BLHOSE310A |
79mm |
85mm | .2 |
47mm | 10m |
BLHOSE410A | 102mm | 108mm | .2 |
61mm | 10m |
VHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Bend Radius |
SAHOSE16 |
152mm |
158mm | .94 |
150mm |
SAHOSE19 | 180mm | 186mm | 1.09 |
180mm |
CCHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
Roll Length |
SAHOSE16 |
16mm |
30mm | .54 |
1.5 |
112mm | 20m |
SAHOSE19 | 25mm | 39mm | .76 |
1.5 |
175mm | 20m |
MWHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
MWHOSE19 |
19mm |
28mm | .39 |
2.5 |
29mm | - |
HCS20 HCS25 | 20m |
MWHOSE25 | 25mm | 34mm | .51 |
2.5 | 38mm | - |
HCS25 HCS32 | 20m |
MWHOSE32 | 32mm | 41mm | .71 |
2.5 | 48mm | HCHD(S)040 | HCS32 HCS40 | 20m |
MWHOSE38 | 38mm | 47mm | .88 |
2.5 | 57mm | HCHD(S)043 HCHD(S)047 | HCS32 HCS40 | 20m |
MWHOSE51 | 51mm | 60mm | 1.15 |
2.5 | 77mm | HCHD(S)059 | HCS50 | 20m |
HWHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCS clamp to suit |
Roll Length |
HWHOSE13 |
13mm |
23mm | .36 |
8 |
95mm | HCS16 HCS20 | 10m |
HWHOSE16 | 16mm | 26mm | .4 |
8 |
110mm | HCS16 HCS20 HCS25 | 10m |
SIHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
SIHOSE25 |
1" / 25mm | 1 3/8" / 35mm | .6 |
5 |
2 7/16" / 62mm | HCHD034 | HCS25 | 20m |
SIHOSE32 | 1 1/4" / 32mm | 1 5/8" / 41mm | .73 |
4.5 | 3 1/8" / 80mm | HCHD040 | HCS32 | 20m |
SIHOSE38 | 1 1/2" / 38mm | 1 7/8" / 47mm | .85 |
4 | 1" / 26mm | HCHD043 | HCS40 | 20m |
SIHOSE51 | 2" / 51mm | 2 3/8" / 61mm | 1.31 |
4 | 5 7/8" / 150mm | HCHD059 | HCS50 | 20m |
SIHOSE63 | 2 1/2" / 63mm | 2 15/16" / 74mm | 1.6 |
3.5 | 7 1/2" / 190mm | HCHD073 | HCS60 | 20m |
SIHOSE76 | 3" / 76mm | 3 7/16" / 87mm | 2.06 |
3.5 | 8 7/8" / 225mm | HCHD085 | HCS75 | 20m |
SIHOSE102 | 4" / 102mm | 4 7/16" / 113mm | 2.7 |
2 | 14 3/16" / 360mm | HCHD0112 | HCS110 | 20m |
FFHOSE |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
FFHOSE38 |
1 1/2" / 38mm | 1 15/16" / 50mm | 1.1 |
4 |
3" / 76mm | HCHD(S)047 | HCS40 | 20m |
FFHOSE51 | 2" / 51mm | 2 1/2" / 63mm | 1.5 |
4 | 4" / 102mm | HCHD(S)059 HCHD(S)063 | HCS50 HCS60 |
20m |
SLANG |
Internal
Diameter |
External
diameter |
Weight kg/m |
Max Pressure
bar |
Bend Radius |
HCHD(S) clamp to suit |
HCS clamp to suit |
Roll Length |
SLANG30 |
1 3/16" / 30mm | 1 1/2" / 38mm | .55 |
4 |
1 3/4" / 45mm | HCHD(S)037 | HCS25 HCS32 |
20m |
SLANG40 | 1 9/16" / 40mm | 1 7/8" / 48mm | .79 |
4 | 2 3/8" / 60mm | HCHD(S)047 | HCS32 HCS40 |
20m |
SLANG45 | 1 3/4" / 45mm | 2 1/16" / 53mm | .88 |
4 | 2 11/16" / 68mm | HCHD(S)051 | HCS40 HCS50 |
20m |
SLANG50 | 2" / 51mm | 2 5/16" / 59mm | 1 |
4 | 3 1/16" / 77mm | HCHD(S)059 | HCS40 HCS50 | 20m |
SLANG57 | 2 1/4" / 57mm | 2 9/16" / 65mm | 1.1 |
3.3 | 3 3/8" / 86mm | HCHD(S)063 | HCS50 HCS60 | 20m |
SLANG60 | 2 3/8" / 60mm | 2 11/16" / 68mm | 1.2 |
3.3 | 3 9/16" / 90mm | HCHD(S)063 HCHD(S)068 | HCS50 HCS60 | 20m |
SLANG65 | 2" / 51mm | 2 7/8" / 73mm | 1.3 |
3.3 | 3 7/8" / 98mm | HCHD(S)068 HCHD(S)073 | HCS60 | 20m |
SLANG75 | 3" / 76mm | 3 5/16" / 84mm | 1.4 |
3.3 | 4 1/2" / 114mm | HCHD(S)085 | HCS75 | 20m |
SLANG90 | 2" / 51mm | 3 7/8" / 98mm | 1.9 |
2 | 5 5/16" / 135mm | HCHD(S)097 | HCS90 | 20m |
SLANG100 | 4" / 102mm | 4 5/16" / 110mm | 2.3 |
2 | 6" / 153mm | HCHD(S)104 | HCS90 HCS110 | 20m |
SLANG110 | 4 5/16" / 110mm | 4 11/16" / 119mm | 2.8 |
2 | 6 1/2" / 165mm | HCHD(S)112 | HCS110 | 20m |
SLANG125 | 5" / 127mm | 5 3/8" / 137mm | 3.3 |
2 | 7 1/2" / 191mm | HCHD(S)130 | HCS130 | 20m |
SLANG150 | 6" / 152mm | 6 7/16" / 163mm | 4.4 |
2 | 9" / 228mm | HCHD(S)162 | HCS150 | 20m |
SLANG200 | 8" / 203mm | 8 9/16" / 218mm | 6.8 |
2 | 16" / 406mm | HCHD(S)213 | HCS200 | 12m |
SLANG250 | 10" / 254mm | 10 5/8" / 270mm | 8.5 |
2 | 20" / 508mm | HCHD(S)260 | HCS250 | 12m |
SLANG300 | 12" / 305mm | 12 11/16" / 323mm | 10.8 |
2 | 23 7/8" / 606mm | HCHD(S)300 | HCS300 | 12m |